The evolution of perfection: The premium presetting and measuring machine for tools of all kinds
The perfected design of this premium presetting and measuring machine impresses with maximum ergonomics and strong optics. With the direct connection with external systems and central management of all tool data with TMS Tool Management Solutions, »venturion« has everything you need for the networked manufacturing of the future. And for extreme longevity thanks to the best brand-name components and careful processing.
The ZOLLER »pilot« image processing is unique because of its:
The transmitted light camera guarantees high-contrast, bright cutting edge inspection with 22, 30, or 40 x magnification of cutting tool edges depending on screen size
The new, variable »cockpit« control unit allows the user to work comfortably on the device. With 180 degrees of tool accessibility, it is much easier to change tools. With the »eQ« one-hand control handle, you can position the optic carrier in no time at all.
There are many good reasons for the unique precision of »venturion«. Most of them can only been seen by looking inside — for example, the Heidenhain measuring systems, Festo pneumatics, and Uhing drive nuts.
Robust, and equipped for the workshop, »venturion 450« can be placed directly in manufacturing.
All power-activated functions of the high-precision spindle are triggered by gently pressing a button. This is simple, convenient, and results in consistent precision.
Insert tool, push a button, finished. That's how simple it is to power-activated clamp tools using the universal »ace« high-precision spindle (all-clamping element) from ZOLLER — always with the same precision, accurate and reliable to the last μm.
The ergonomic one-hand control handle »eQ«, allows the optic carrier to be brought into position quickly and easily on both axes with the push of a button. The »eQ« Plus function can store a frequently used measuring function specifically for the user.
With the direct connection with external systems and the option of centrally managing tool data, »venturion 450« has everything you need for the networked manufacturing of the future.
|Measuring range Z||450/620*/820* mm|
|Measuring range X||210/310* mm|
|Snap gage Ø||100/70/40 mm|
Using adapters and attachment holders can reduce the indicated measuring range in some circumstances. The snap gage diameter depends on the options used.
* optionally available: the snap gage diameter will be reduced accordingly.
Prepared quickly and easily for any requirement
ZOLLER offers connections ot more than 100 different machine-readable output formats here. Manual entries are no longer necessary, since the data is directly available for the specific machine controller.
The following options are available for data output:
Measured tool data is printed onto a label used to identify the measured tool. Data can then be read out again with a scanner.
Alternatively, data can be stored on a cip in the tool holder with ZOLLER tool identification, then read later by the machine controller.
The most secure and most convenient data transmission option uses the DNC network. In this option, tool data is sent directly from the presetting and measuring machine to the machine controller.
Length limit system
Separate »cockpit« control unit
TFT satellite monitor
Color Laser Printer
Data transfer with »zidCode«
Data transfer with post processor
Label printer formats
Adapter or tool trolley
Automatic loading station for tool measuring
Standing aid with pneumatic spring height adjustment
»ace« high-precision spindle
SK 50 High-Precision Spindle
High-precision spindle tension element clamping
SK 25 - 60 attachment holder
HSK 25 - 160 attachment holder
Capto 3 - 10 attachment holder
VDI 16 - 60 attachment holder
KM 32 - 63 attachment holder
Attachment holder hydro-expansion chuck
SK 25- 60 steep taper adapter
HSK 25 -160 hollow shank taper adapter
Capto C 3 - 10 adapter
VDI 16-80 adapter
KM 32-100 adapter
Hydro-expansion clamping adapter